OVERVIEW
• Class-D amplifier
• Switched-mode power supply
• Mode selection: Stereo, Bridge or Parallel
• Independent limiter for each channel
• Extremely accurate and independent level settings for each channel
• LEDs indicators
• Convection cooled
• Balanced Jack TRS and XLR inputs
• Unbalanced RCA outputs
• Binding post-jacks or Speakon® outputs
• Short-circuit, over current and high temperature independent protections for each channel
• 2x19" rack mount spaces
TECHNICAL SPECIFICATIONS
• Stereo power output:
- 4 Ohms RMS stereo power (minimum): 2 x 150 W RMS
- 8 Ohms RMS stereo power: 2 x 80 W RMS
• Mono bridged power output:
- 8 Ohms bridged power (minimum): 1 x 300 W RMS
• Signal-to-noise ratio Less than 90 dB
• Input sensitivity: 4 dBu +/-2 dB
• Distortion:
- THD at 1kHz 1/2 rated power Less than 0.1%
- Slew rate: - 65 dB at 1 kHz
• Frequency response (4 Ohms/1 W): +0.5 dB ; 20 Hz-20 kHz
• Input impedance : unbalanced 15 kOhms / Balance 30 kOhms
• Clip: 0 dBr
• Cooling: Convection cooled
• Input connectors:
- XLR, Balanced Jack TRS + Unbalanced RCA
• Output connectors:
- Binding post-jacks + 4-pole Speakon®
• Front control panel
- AC power switch, Channel 1 and 2 volume
• Rear control panel
- Mode selection button
• Indicators: Protect (red) / Clip (yellow) / Signal (green)
• Protections: Short-circuits, over current and high temperature protected
• Power supply: 100/230 VAC - 50/60 Hz
• Dimensions: 482 mm x 44 mm x 330 mm
• Net weight: 4.3 kg
-
User guide
English Version
|