AIR · Handheld Microphone

S2 Stage

Dynamic Supercardioid Handheld Microphone.

Supercardioid.

Excellent feedback rejection.
Voice up front.

AIR S2 Stage handheld microphone, matte black finish
€49.00 incl. VAT

The Air S2 Stage is a supercardioid dynamic microphone built for the stage and live vocals.

Its supercardioid polar pattern offers high acoustic isolation and excellent feedback rejection, allowing singers and presenters to push the volume without risk of unwanted feedback.

With a frequency response from 100 Hz to 15 kHz, it delivers high-quality vocal capture that prioritises clarity and presence while naturally filtering out unwanted low frequencies. Sensitivity of -74 dB±3 dB and impedance of 400 Ω for universal compatibility with mixing consoles and microphone preamps.

Built for the stage.

Isolation

Isolation and noise reduction

The internal rubber shock mount dramatically cuts handling and cable noise, keeping capture clean as the mic changes hands or moves across the stage. The multi-layer pop filter effectively protects against wind and plosives, preventing unpleasant saturation during close-up speech.

The result: a clear and intelligible sound, even in the most demanding stage conditions.

Construction

Robust construction for touring

A die-cast zinc body with matte black finish stands up to shock and drops, built for the rigours of touring and back-to-back gigs. Compact (Ø51.5 × 172 mm), light and balanced, it sits comfortably in hand during long sessions.

Supplied with protective pouch. Standard 3-pin male XLR connector for professional wiring.

In use

Push the volume. Feedback stays out.

Technology

Built for the stage.

Supercardioid dynamic

Optimised acoustic isolation and feedback rejection.

100 Hz – 15 kHz

Clear, present vocal capture. Low frequencies naturally filtered.

Internal rubber isolation

Dramatically cuts handling and cable noise.

Multi-layer pop filter

Effective wind and plosive protection.

Specifications

Technical specifications

Type
Moving coil dynamic
Polar pattern
Supercardioid
Frequency response
100 Hz – 15 kHz
Sensitivity
-74 dB±3 dB (0 dB = 1 V/μbar @ 1 kHz)
Impedance
400 Ω±30 % (@ 1 kHz)
Isolation system
Internal rubber shock mount (reduces handling noise)
Pop filter
Built-in multi-layer (wind and plosive protection)
Construction
Die-cast zinc, matte black finish
Dimensions
Ø51.5 × 172 mm
Weight
315 g
Connector
3-pin male XLR

Available

€49.00 incl. VAT

Comes with a soft transport pouch