MYOS08A

A compact active speaker for the stage and small setups.
The MYOS08A is a compact 2-way active speaker, built for sound reinforcement in small venues, bars, conference rooms, and any event where footprint has to stay small. Its asymmetric shape makes it just as much at home on a pole as it is on stage as a monitor. With a total amplification of 700 W RMS, it delivers up to 124 dB of sound pressure.

Class D amplification, bi-amplified for efficiency.
The MYOS08A is bi-amplified in Class D: 350 W RMS for the low-frequency driver and 350 W RMS for the compression driver. Total power reaches 700 W RMS (1400 W peak), with a frequency response of 70 Hz – 20 kHz and a crossover point set at 1.6 kHz.

A reinforced cabinet, built with stage monitor use in mind.
The enclosure is built from reinforced 15 mm plywood, a material chosen in professional audio for its rigidity and its ability to damp unwanted resonance, keeping the sound clean under sustained use. Its asymmetric shape is a deliberate design choice: set flat, the cabinet acts as a stage monitor angled toward the performer; set upright, it becomes a compact PA speaker. Its horn rotates 90° to preserve dispersion when the speaker is laid on its side. Ten M8 inserts and dual 36 mm pole sockets (0° / 7.5°) cover both fixed installation and mobile setups, a wooden top handle makes it easy to carry, an integral metal grille and textured polyurea finish protect the cabinet, and four rubber feet keep it stable on the ground.

Easy installation with an optional wall-mount bracket.
Paired with the optional MYOS08sup wall-mount yoke, the MYOS08A moves just as easily into a fixed installation as it does on tour. The bracket is designed for horizontal mounting only, with 8 tilt positions from 0° to 56° in 8° increments, letting the aim be set precisely once the speaker is up, ideal for bars, restaurants, shops, or any venue where the speaker needs to disappear into the room on a permanent basis.

A complete DSP to adapt to every context.
The onboard DSP is controlled directly from the rear-panel display and push-rotary knob, no app or Bluetooth needed. The Mode menu offers 4 preset EQ curves (Normal, Live, Club, Speech) to match the sound to the context, while Location corrects the response for how the speaker is positioned: pole-mounted, as a stage monitor, or wall-mounted. Bass and treble each adjust independently from -10 dB to +10 dB, an adjustable high-pass filter (80, 100 or 120 Hz, or off) tunes the MYOS08A to work alongside a paired subwoofer, and the front LED can be set off, solid blue, or blue switching to red when the limiter kicks in. A Reset function restores factory settings in one step.

Connectivity.
One MIC/LINE input on a combo XLR/jack connector with a LINE/MIC switch, one XLR line output with a LINK/MIX switch to pass the signal on to another speaker or a subwoofer. Switch-mode power supply, 220-240V AC 50Hz.

A natural pairing with subwoofers from the MYOS range.
Paired with a MYOS15ASub or MYOS18ASub subwoofer, the MYOS08A forms a compact system that covers the full spectrum, from deep bass through to the top end. The MYOS08A’s adjustable high-pass filter (80, 100 or 120 Hz) and the subwoofer’s own X-OVER setting (60/80/100/120/150 Hz) are set to the same value for a seamless handover between the two units. The subwoofer features a top-mounted 36 mm socket for a coupling pole, letting the MYOS08A sit right above it on a single point on the floor, a setup that’s quick to deploy for outstanding sound performance.

Key features:

• Compact 2-way active speaker, 8″ driver + compression driver
• 700 W RMS bi-amplified in Class D, up to 124 dB SPL
• 90° rotatable horn to preserve dispersion in horizontal use
• Asymmetric cabinet: PA speaker or stage monitor in one enclosure
• Compatible with the MYOS08sup wall-mount yoke (optional)
• Full onboard DSP: Mode / Location / Treble / Bass / HPF / LED / Reset

Technical specifications:

• Configuration: 2-way active
• Low-frequency driver: 8″, 1.5″ voice coil, 33 Oz magnet, 4 Ohms, 250W AES
• High-frequency driver: 1.35″ compression driver, 8 Ohms, 50W AES
• Amplification: 350W RMS Class D (LF) + 350W RMS Class D (HF)
• Total power: 700 W RMS / 1400 W peak
• Maximum SPL: 124 dB
• Frequency response: 70 Hz – 20 kHz
• Crossover frequency: 1.6 kHz
• Dispersion: 54° x 71° (10 kHz), 90° rotatable horn
• Power supply: 220-240V AC 50Hz switch-mode (SMPS)
• Enclosure: reinforced 15 mm plywood, textured anti-scratch polyurea finish
• Mounting: 10 x M8 inserts, dual 36 mm pole sockets (0° / 7.5°), 4 rubber feet, wooden top handle
• Optional accessory: MYOS08sup wall-mount yoke (horizontal, 8 tilt positions from 0° to 56°)
• Input: combo XLR/jack (MIC/LINE)
• Output: XLR with LINK/MIX switch
• Dimensions (H x W x D): 465 x 249 x 240 mm
• Net weight: 11 kg