EN | FR
{path}
MOJO2200curve / {description}
MOJO2200curve
 

  • 1299,00 € VAT
  • CODE : H11175
  • EAN : 3662009022406
Compact, high-output curve array system

This new system uses a curve array architecture that provides an optimised, controlled sound diffusion at a sound pressure level of 128dB SPL.

With a total of 12 loudspeakers, the satellite has been specially designed to achieve an effective aperture of 100° horizontal and 70° vertical.

A powerful DSP
Bass is provided by a powerful 12-inch long-excursion bass driver mounted in a bass-reflex subwoofer.
The latter accommodates class D amplification with all the protections, a 4-input mixer with TWS Bluetooth® and a powerful DSP offering the possibility to adjust the sound according to your desires.


Feel the power with TWS Bluetooth®

Send music from your mobile to the MOJO2200curve Bluetooth® module .
Thanks to the “True Wireless Stereo” technologie it will transmit the audio signal to a second MOJO and you'll enjoy stereo mode!


Pneumatic coupling bar
Installation is simplified thanks to the pneumatic coupling bar, which allows effortless height adjustment and also provides a wired connection between the amplifier and the satellite.
 
PDF data sheet

  • Technical data
  • Related products
  • Downloads
Column • Power: 300W RMS - 600W max. • Nominal impedance: 6 Ohms • Boomer: 3 X 5" neodynium • Tweeter: 9 x 1" • Dispersion: 120° x 70° (HxV) • Connector: Insert into housing • Dimensions: 188 x 517 x 243 mm • Net weight: 8 kg Subwoofer • Power: 500W RMS -1000W max. • Nominal impedance: 4 Ohms • Boomer: 1 x 12 inches • Dimensions: 366 x 625 x 541 mm • Net weight: 27 kg Pneumatic coupling bar Installation is simplified thanks to the pneumatic coupling bar for effortless height adjustment, and also provides the wired between the amplifier and the satellite. • Minimum height: 177 cm • Maximum height: 210 cm Complete system • Frequency response 38 - 18,000Hz • SPL max. (@1m) 128 dB Amplifier module. • Low stage: 1 x 700W RMS / 1400W Max at 6 Ohms • Mid/high stage 1 x 300W RMS / 600W Max at 4 Ohms • Inputs : - CH1: 1 x XLR/Line Jack/Microphone Combo - CH2 : 1 x XLR/Line Mic/Jack Combo - CH3: 1 x Line Jack - CH4/5: 1 x RCA L/R line + Bluetooth® input • Input impedances - Micro 1 & 2 : Balanced 40 KHoms - Line 1 & 2 : Balanced 10 KHoms - Line 3 : Balanced 20 KHoms - Line 4 & 5 : Unbalanced 5 KHoms • Outputs : - 1 Insert on the top of the housing for the stellite - 1 x balanced XLR MIX OUT for output to another system - 2 x XLR LINE OUT balanced for the CH1 and 2 replica • DSP - 24 bit (1 in 2 out) - EQ / Presets / low cut / Delay / Bluetooth® TWS • Adjustment of levels on each channel + Master • Adjusting the level of the cabinet
Options
  • COV-MOJO2200curve

    Audiophony : Sonorisation
    COV-MOJO2200curve / Set of covers for MOJO2200curve

    Set of covers for MOJO2200curve
  • MOJO2200curve_board

    Audiophony : Sonorisation
    MOJO2200curve_board / Wheel board for MOJO2200curve

    Wheel board for MOJO2200curve
  • User guide     
    Deutsche Version   

  • User guide     
    English Version   

  • User guide     
    Versión en Español   

  • User guide     
    Nederlandse Versie