MYOS15A

MYOS15A pairs a 15″ low-frequency driver with a high-output compression driver, powered by a hybrid 1000 W RMS bi-amplification stage (500 W Class D for the low end, 500 W Class AB for the high end), for a maximum SPL of 129 dB. Built to fill large volumes and demanding stages with a single diffusion point, it delivers the headroom and control needed for shows that push the limits of a single active enclosure.

Hybrid amplification designed for balanced sound.
The MYOS15A pairs a 500 W RMS Class D amplifier for the low-frequency driver with a 500 W RMS Class AB amplifier for the compression driver, each transducer matched to the amplification best suited to its frequency range. This hybrid architecture combines the efficiency of Class D in the low end with the sonic finesse of Class AB in the high end, for a total of 1000 W RMS (2000 W peak) driving a frequency response from 45 Hz to 20 kHz and real headroom even at high levels.

A reinforced cabinet, built for stage-monitor use too.
The cabinet is built from 15 mm reinforced plywood in an asymmetric shape with cut corners, so the MYOS15A can also be laid on its side and used as a stage monitor without compromising dispersion. Twelve M10 inserts and a tilting base, adjusted by two buttons on either side, cover both pole-mount and rigging setups, a pair of metal side handles is built in for two-person carrying, an integral metal grille and textured polyurea finish protect the cabinet, and four rubber feet keep it stable on the ground.

Two inputs to mix directly from the speaker.
The MYOS15A features two independent inputs, each with its own level control: a combo XLR/jack input with a MIC/LINE switch, and a dedicated XLR line input. This dual-input design allows a microphone and a line source to be mixed directly at the enclosure without an external mixer, with a single XLR output (LINK/MIX switch) to link additional units.

A natural pairing with subwoofers from the MYOS range.
Paired with a MYOS15ASub or MYOS18ASub subwoofer, the MYOS15A forms a system capable of covering the full spectrum, from deep bass to high frequencies. The MYOS15A’s adjustable high-pass filter (80, 100 or 120 Hz) and the subwoofer’s X-OVER setting (60/80/100/120/150 Hz) are set to the same value for a seamless transition between the two elements. The subwoofer’s top-mounted 36 mm socket accepts a coupling pole to position the MYOS15A directly above it, on a single footprint on the ground, for a setup that’s quick to deploy for exceptional sound performance.

A full-featured DSP for adapting to any context.
The onboard DSP is controlled directly from the rear-panel display and push-rotary knob, no app or Bluetooth needed. Mode selects between four EQ presets (Normal, Live, Club, Speech) to match the type of performance, Location corrects the response for how the speaker is positioned (pole-mounted, as a stage monitor, or wall-mounted), Treble and Bass allow ±10 dB adjustment, and HPF (OFF/80/100/120 Hz) tunes the MYOS15A to work alongside a paired subwoofer. An LED indicator (OFF/ON/LIMIT) reports the speaker’s status at a glance.

Key features:

• 1000 W RMS / 2000 W Max hybrid bi-amplification (500 W Class D + 500 W Class AB)
• 15″ low-frequency driver and high-output compression driver
• Maximum SPL: 129 dB
• Frequency response: 45 Hz – 20 kHz
• Two independent inputs (combo XLR/jack + XLR line) for direct mixing
• Full-featured onboard DSP with rear-panel display and push-rotary knob
• Reinforced cabinet designed for both PA and stage-monitor use
• Natural pairing with MYOS15ASub / MYOS18ASub subwoofers

Technical specifications:

• Configuration: 2-way active
• Low-frequency driver: 15″, 2.5″ voice coil, 60 Oz magnet, 4 Ohms, 350W AES
• High-frequency driver: 1.35″ compression driver, 8 Ohms, 50W AES
• Amplification: 500W RMS Class D (LF) + 500W RMS Class AB (HF)
• Total power: 1000 W RMS / 2000 W peak
• Maximum SPL: 129 dB
• Frequency response: 45 Hz – 20 kHz
• Crossover frequency: 1.75 kHz
• Dispersion: 90° x 60° (10 kHz)
• Power supply: 220-240V AC 50Hz switch-mode (SMPS)
• Enclosure: reinforced 15 mm plywood, asymmetric shape with cut corners for monitor position
• Finish: textured anti-scratch polyurea paint
• Grille: integral metal
• Indicator: front-panel Power/Clip LED
• Mounting: 12 x M10 inserts, tilting base (two-button adjustment), 4 rubber feet, 2 metal side handles
• Inputs: 1 combo XLR/jack (MIC/LINE) + 1 XLR (line), independent level controls
• Output: XLR with LINK/MIX switch
• Dimensions (H x W x D): 730 x 439 x 420 mm
• Net weight: 28 kg